Rosen DVD Entertainment System Manuel du propriétaire télécharger pdf (Page 29)

AV7500 Installation Guide AP1024 Rev A

Page 7

Step 3:

PRE-DELIVERY AND RE-TEST

a. Start the vehicle (ensure that it is safe to do so, there are no tools or people under the hood)

b. Perform the following steps

•

Insert a DVD (in good condition) and select play

•

Re-check IR headphones and FMT audio

•

Eject the disc

•

Remove the protective films and clean the unit as needed

c. Place the Owners Information package in the glove compartment

d. Place the IR headphones, remote control and game controller in a convenient location

10 Installer Setup

To access install setup menu: use the remote control, press EJECT-ENTER-1-1-2-0

• To change AUX 2 input labeling, highlight AUX 2 label and scroll left/right using arrows.

• To select EXT FMM, highlight EXT FMM and select on.

• POD ADDR is used to manually set pod address

Autoà address is based on which port the pod is plugged into.

• Selecting A or B allows you to manually set the pod’s address

When manually selecting POD ADDR, an OSD will appear on opposite pod displaying what pod it

will be

Specifications

Supply Voltage : 12V (+) ACC negative ground system, 11-16VDC operating range

Current Consumption : 7A max operating

Video Signal : Composite video 1.0Vp-p 75 , NTSC/PAL

Audio Signal : Audio Output : 2Vrms, line output

IR Audio Signal : Channel A= 2.3 MHZ / 2.8 MHZ and Channel B= 3.2 MHZ / 3.8 MHZ

Discs Played : (1) 5” (12cm) DVD-VIDEO Disc

(2) Compact Disc (CD-DA/CD-R/CD-RW/MP3)

Operating Temperature : 0C to +60C

Note: Specifications and designs are subject to modification without notice.

1 2 ... 24 25 26 27 28 29 30 31

Pas de commentaire

Rosen DVD Entertainment System Manuel du propriétaire Page 29